Pump Technology and Overhauling

24-10-2021 - 28-10-2021 3300 دبي

 

Course Introduction:

 

Pumping systems account for nearly 20% of the world’s electrical energy demand and range from 25-50% of the energy usage in certain industrial plant operations

 

There are lots of pump types available, but which one is right for you? Understanding which pump type is right for your application is critical to reduce costs and increase the life of your pump and system

 

Centrifugal pump single or multistage is the Best pump choice for lower viscosity liquids and high flow rates. No pulsations that may be found in some positive displacement pumps.

Multi-stage centrifugal pumps are now primarily used in this severe service. Two typical styles of multi-stage centrifugal pumps—barrel and horizontally split pumps are offered by different manufacturers.

 

 

Course Objectives:

 

Upon successful completion of this course, the delegates will be able to:

Ø  Identify and describe the components of a typical multistage centrifugal pump.

Ø  Describe the operation of a typical multistage centrifugal pump.

Ø  Describe sealing techniques that are commonly used to prevent leaks in a multistage centrifugal pump.

Ø  Describe techniques bearing & loads radial / thrust in a multistage centrifugal pump.

Ø  Identify problems commonly found in multistage centrifugal pumps.

Ø  Implement cost analysis for pump life time

Ø  Distinguish pump performance and hydraulic balancing

 

 

Who Should Attend?

 

This course is intended for supervisors, team leaders and managers in mechanical, mechanical technicians and engineering.

 

 

Course Outline:

 

Day 1:

Pump Construction

  • The Centrifugal Pump
  • Pump Curves
  • Characteristics Of The Centrifugal Pump
  • Most Common End-Suction And
  • In-Line Pump Types
  • Impeller Types (Axial Forces)
  • Casing Types (Radial Forces)
  • Single-Stage Pump
  • Multistage Pumps
  • Long-Coupled And Close-Coupled Pumps

 

Types of Pump

  • Standard Pumps
  • Split-Case Pump
  • Barrel And Horizontally Split
  • Hermetically Sealed Pumps
  • Sanitary Pumps
  • Wastewater Pumps
  • Immersible Pumps
  • Positive Displacement Pumps

 

Mechanical Shaft Seals

  • The Mechanical Shaft Seal’s Components And Function
  • Balanced And Unbalanced Shaft Seals
  • Types Of Mechanical Shaft Seals
  • Seal Face Material Combinations
  • Factors Affecting The Seal Performance
  • Troubleshooting

 

Day 2:

Pump Bearing

  • Types And Functions
  • Radial And Thrust Load
  • Troubleshooting

 

Pump Installation

  • New Installation
  • Existing Installation-Replacement
  • Pipe Flow For Single-Pump Installation
  • Limitation Of Noise And Vibrations
  • Sound Level (L)

 

Day 3:

System Hydraulic

  • System Characteristics

ü  Single Resistances

ü  Closed And Open Systems

  • Pumps Connected In Series And Parallel

ü  Pumps In Parallel

ü  Pumps Connected In Series

  • Pump Hydraulic Balancing

ü  Balancing Device

ü  Back To Back Impeller

 

Performance Adjustment of Pumps

  • Adjusting Pump Performance
  • Throttle Control
  • Bypass Control
  • Modifying Impeller Diameter
  • Speed Control
  • Comparison Of Adjustment Methods
  • Overall Efficiency Of The Pump System
  • Example: Relative Power Consumption When The Flow Is Reduced By 20%
  • Frequency Converter

ü  Basic Function And Characteristics

ü  Components Of The Frequency Converter

ü  Special Conditions Regarding Frequency Converters

 

Day 4:

Liquids

·         Viscous Liquids

·         Non-Newtonian Liquids

·         The Impact Of Viscous Liquids On The

·         Performance Of A Centrifugal Pump

·         Selecting The Right Pump For A Liquid

·         With Antifreeze

·         Calculation Example

·         Computer-Aided Pump Selection For Dense And

·         Viscous Liquids

 

Materials

·         What Is Corrosion?

·         Types Of Corrosion

·         Metal And Metal Alloys

·         Ceramics

·         Plastics

·         Rubber

·         Coatings

 

Day 5:

Life Cycle Costs Calculation

·         Initial Costs, Purchase Price

·         Installation And Commissioning Costs

·         Energy Costs

·         Operating Costs

·         Environmental Costs

·         Maintenance And Repair Costs

·         Downtime Costs, Loss Of Production

·         Decommissioning And Disposal Costs

 

Operation and Maintenance

·         Pump Inspection

·         Pump Troubleshooting

·         Pump Repair

          

 

 

Course Methodology:

 

A variety of methodologies will be used during the course that includes:

·         (30%) Based on Case Studies

·         (30%) Techniques 

·         (30%) Role Play

·         (10%) Concepts

·         Pre-test and Post-test

·         Variety of Learning Methods

·         Lectures

·         Case Studies and Self Questionaires

·         Group Work

·         Discussion

·         Presentation

 

Course Fees:

 

This rate includes participant’s manual, Hand-Outs, buffet lunch, coffee/tea on arrival, morning & afternoon of each day.

 

Course Timings:

 

Daily Course Timings:

    08:00 - 08:20       Morning Coffee / Tea

    08:20 - 10:00       First Session

    10:00 - 10:20       Coffee / Tea / Snacks

    10:20 - 12:20       Second Session

    12:20 - 13:30       Lunch Break & Prayer Break

    13:30 - 15:00       Last Session

بحسب مواضيع الدورات
2020
Training Plan
الاعتماد

Global Innovation Institute

مركز أبوظبي…

معهد إدارة…

EFQM

معهد البترول…

جمعية اللحام…

الجمعية الامريكية…

DWA - الجمعية…

منظمة الاعتماد…

ICML: International…

جنرال إلكتريك